Every computer user has faced this problem. What I speak of, is the tragedy of the corrupted USB Pen drive or SD Card. No matter what you do, at some point, your computer simply refuses to read your USB drive. Fortunately, there are ways to rectify this with one only needing to use a command prompt in PC.
Connect the corrupted drive to your machine.
In the command prompt, enter the following commands.
Type diskpart and press Enter.
Next type list disk and press Enter.
Then type select disk followed by the number of your disk and hit enter.
After the disk is selected, you will need to type clean into the command prompt and hit enter.
Next command is creates partition primary.
Type active and hit enter followed by select partition 1.
In the last step, type format fs=fat32 and press enter. Once this step is completed you should find your USB drive working as good as new. If not, go back through the steps and see what you missed. A screenshot of how the process looks is attached below.
If you like this post then share it with your friends.