Skip to main content

This $5 lamp is powered by gravity...!

By:Prayag Nao

gravity-light 

A lamp for $5 that does not require any electrical power source?

It may sound like an impossible dream, but two designers in London have built functioning prototypes of GravityLight, a cheap way for people in developing countries t0 light homes, recharge batteries, or power a radio. And they just exceeded their Indiegogo fundraising goal by more than 500 percent with 21 days left in their campaign, so they’ll have the resources to mass-produce the light for less than $5 a unit.

Visit Website:GravityLight


The GravityLIght comes in the bag that will be filled with dirt or stones to power it
Above: The GravityLIght comes in the bag that will be filled with dirt or stones to power it
Image Credit: GravityLight

Martin Riddiford and Jim Reeves have spent four years developing GravityLight, which uses the Earth’s gravity to generate enough power to light an LED bulb for half an hour — no electrical grid, batteries, or any external generator required.
Using the GravityLight simply requires removing the small white lamp from its bag, hanging it up, filling the bag with about 20 pounds of dirt or rocks, and attaching the bag to bottom of the device.
Gravity powers a generator, light fills your room, and every 30 minutes, you hoist the bag back up.
The goal is to provide clean, efficient light for the 1.5 billion human beings on this planet who still do not have reliable access to electricity and use kerosene-powered lamps. According to Riddiford and Reeves, the use of kerosene results in vastly higher cancer rates due to smoke inhalation, and 2.5 million burn victims due to dropped or jostled lamps every year in India alone. Not to mention the cost: 10 percent to 20 percent of a household’s income in the developing world can go to fuel for lighting.
The initial run of 1,000 GravityLights will be distributed for free to villagers in Africa and India, the designers say. Based on the results, they will tweak the product and then seek NGO and non-profit organizations’ help in distributing it even more widely.

Comments

Popular posts from this blog

How an engine cooling system works

By: Prayag nao



HOW INTERNAL EXPANDING BRAKE WORKS

By:Prayag nao


An internal expanding brake consists of two shoes S1 and S2. The outer surface of the shoes are lined with some friction material (usually with Ferodo) to increase the coefficient of friction and to prevent wearing away of the metal. Each shoe is pivoted at one end about a fixed fulcrum O1and O2 and made to contact a cam at the other end. When the cam rotates, the shoes are pushed outwards against the rim of the drum. The friction between the shoes and the drum produces the braking torque and hence reduces the speed of the drum. The shoes are normally held in
off position by a spring . The drum encloses the entire mechanism to keep out dust and moisture. This type of brake is commonly used in motor cars and light trucks.



We shall now consider the forces acting on such a brake, when the drum rotates in the anticlockwise direction. It may be noted that for the anticlockwise direction, the left hand shoe is known as leading or primary shoe while the right hand sho…

Awesome iris mechanism

By:Prayag nao



An iris is a mechanism that is used as a compact solution to close and open holes. It is made up of usually a series of metal plates that can fold in on each other or expand out. Iris mechanisms are commonly found in optical shutters (diaphragms). Irises are sometimes used in science fiction as doors.